Hardwood & Cypress

We can supply your hardwood needs with F17 Kiln Dried Hardwood, e-beam+ (F17 LVL), Supa 17 (Laminated Hardwood), and F8 Unseasoned Hardwood. For those more exotic requirements we are also able to source a wide variety of Specialty Hardwoods from suppliers all over Australia. These include Spotted Gum, Turpentine, Sydney Blue Gum, Blackbutt, Merbau to name but a few.

We can also supply Cypress Pine cut to your specifications. This can be supplied as dressed all round (DAR) or rough sawn. In the case of Cypress Posts these can also be supplied as rough sawn or as a premium plastic wrapped DAR product. This reduces the tendancy of surface checking.

F17 Kiln Dried Hardwood

We carry in stock a large range of F17 Kiln Dired Hardwood ranging in size from 70x35 all the way through to 290x45.

Stock lengths for F17 are 2.4, 2.7, 3.0, 3.6, 4.2, 4.8, 5.4 and 6.0m.

e-beam+ F17 LVL
We carry in stock a large range of e-beam+ F17 LVL ranging in size from 90x45 all the way through to 290x45.

Available in lengths from 2.4m to 7.2 ex-stock with longer lengths available as special manufacture up to 12.6m.

SUPALAM™ A17

SUPALAM™ A17 is a finger joined and laminated hardwood structural beam range, produced at ITC Timber Heyfield from sustainable regrowth Victorian Ash using advanced production technology and highly automated operation.

Available in large sections up to 290 mm in both 35 and 45 mm thickness, and long lengths up to 7.2 m.

F8 Unseasoned Hardwood

 

We are able to source and supply all of your F8 unseasoned hardwood with minimal lead time. All F8 orders are cut to customer specification as required and available in all section sizes up to 300x50x6000mm.

 

Contact one of our friendly staff to for your building materials.