Treated Pine Products
Calco Trusses & Timbers supply all your CCA, ACQ, Ecowood and LOSP Treated Pine requirements. We stock a large variety of quality treated pine beams, bearers, boards, fascia, handrails and posts for outdoor use.
Treated to hazard level 3 (H3) for exterior, above ground use.
H3 Solid F5/F7 KD Treated Pine (CCA & Ecowood)
H3 treated for exterior, above ground use.
Structurally graded to F7.
Kiln dried (KD) to maximise stability.
Laser Cut
Usage: external structural timber including beams and bearers.
Available Sizes (600mm increments)
70 x 35mm -2.4 to 6.0
90 x 35mm - 2.4 to 6.0
140 x 35mm - 3.6 to 6.0
190 x 35mm - 3.6 to 6.0
70 x 45mm - 2.4 to 6.0
90 x 45mm - 2.4 to 6.0
140 x 45mm - 3.6 to 6.0
190 x 45mm - 3.6 to 6.0
240 x 45mm - 3.6 to 6.0
290 x 45mm - 3.6 to 6.0
H4 Solid F5/F7 KD CCATreated Pine Posts
H4 CCA treated for exterior, in ground use.
Structurally graded to F7.
Kiln dried (KD) to maximise stability.
Laser Cut tp 90x90mm
Usage: external structural timber posts and bearers.
Available sizes
2.4, 2.7, 3.0, 3.6, 4.2, 4.8, 5.4, 6.0m
Primed F7 LOSP KD DAR F/J Treated Pine Posts
Primed with architectural strength primer.
Structurally Graded F7 or better.
Treated with LOSP (light organic solvent preservative) to hazard level 3 (H3) for external above ground use.
Kiln dried (KD) to maximise stability.
Dressed all round (DAR) for a smooth finish.
Finger jointed (F/J) and laminated.
Usage: external appearance grade structural timber. Used for verandah and pergola posts, primed and ready for painting.
Available Sizes (600mm increments)
88 x 88mm - 2.4 to 6.0
112 x 112mm - 2.4 to 6.0
135 x 135mm - 2.4 to 6.0
H3 Primed LOSP KD DAR F/J
Design Pine Boards, Fascia and Handrails
These easy to use primed products are perfect for your next project, no matter if it's a small verandah, cladding a house or creating a dream entertainment area. Design Pine has a profile for you.
Design Pine utilises finger joint technology to create long, straight and defect free boards for every application. Design Pine producers only use exterior grade adhesive in every joints which ensures you to get a product with maximum strength and reliability. Design Pine is then coated with Resene's genuine BLUE primer to give a ready to paint surface for you to apply a topcoat. It that easy to use the “Ultimate outdoor timber solution”.
The range of Design Pine includes structural and decorative profiles for every application around your home. All the profiles have been developed with innovation in mind as this gives flexibility and diversification in application.
|
STRUCTURAL BOARDS
|
GL8 BEAMS
|
|||||||||||||||||||||||||||||||||||||||||||
|
CLICK ON LINK BELOW
|
H3 Solid Unseasoned Rough Sawn Treated Pine
Solid pine treated to hazard level 3 (H3) for exterior above ground use.
Unseasoned
Rough Sawn
Usage: bearers, fencing, landscape and gardens
H3 Unseasoned Rough Sawn
150 x 25mm - 5.4 and 6.0
75 x 38mm - 5.4 and 6.0
75 x 50mm - 5.4 and 6.0
Contact one of our friendly staff to 
for your building materials.
